Welcome to Zhongxin Iron and Steel (Shandong) Group Co., Ltd.
PRODUCT CENTER
<strong>6063 aluminum </strong>alloy material. <br> <strong>6063 </strong>is a low alloyed Al-Mg-Si high plastic alloy.<br> <strong>The main alloy </strong>elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy. <br>
<strong>Thickness: </strong> 0.15-600mm<br> <strong>Port of Destination: </strong> Any port you like<br> <strong>Aluminium Sheets </strong> with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry. <br> <strong>Because of its </strong> good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
<strong>6063 aluminum</strong> alloy material. <br> <strong>The main alloy </strong> elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
<strong>6082</strong> is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance. <br> <strong>It also has moderate</strong> strength and can maintain good operability after annealing. <br> <strong>It is mainly </strong>used in mechanical structure, including bars, plates, pipes and profiles. <br> <strong>This alloy has similar </strong>but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
<strong>6063 aluminum alloy</strong> material.<br> </strong> The main alloy elements</strong> are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
<strong>Aluminium Sheets</strong> with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.<br> <strong>Because of its good</strong> energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
<strong>7075 aluminum</strong> alloy is a cold - treated forging alloy, high strength, far better than mild steel. <br> <strong>7075 </strong> is one of the strongest alloys commercially available. Under heat treatment, can achieve very high strength characteristics. <br> <strong>7075 materials</strong> are generally added a small amount of copper, chromium and other alloys, the department of 7075-T651 aluminum alloy is particularly top grade, known as the best aluminum alloy products, high strength, far better than any mild steel. The alloy also has good mechanical properties and anode reaction.
<strong>2024 aluminum alloy,</strong> the main alloying elements are copper and magnesium.<br> <strong>Applications</strong> where high strength but low weight ratio is required, and good fatigue strength.<br> <strong>Not weldable,</strong> general processing performance. <br> <strong>Because</strong> of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
<strong>The main alloying elements in 6061</strong> alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. <br> Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
Office Address
Located in Jinan Free Trade Pilot Zone, Shandong Province
China is an international steel trade hub. We will connect China's steel resources with the world trade needs in a fast, stable and low-cost way through high-quality products. Together with partners from all over the world, common development, win-win cooperation! Hand in hand to heavy trust, create a better future!
Copyright : Zhongxin Iron and Steel (Shandong) Group Co., Ltd. Powerby : 300.cn jinan2 Seo Tags Privacy Statement
