Welcome to Zhongxin Iron and Steel (Shandong) Group Co., Ltd.
PRODUCT CENTER
<strong>7075 aluminum alloy</strong> is a cold - treated forging alloy, high strength, far better than mild steel. <br> <strong>7075</strong> is one of the strongest alloys commercially available. Under heat treatment, can achieve very high strength characteristics. <br> <strong>7075</strong> materials are generally added a small amount of copper, chromium and other alloys, the department of 7075-T651 aluminum alloy is particularly top grade, known as the best aluminum alloy products, high strength, far better than any mild steel. <br> <strong>The alloy also</strong> has good mechanical properties and anode reaction.
<strong>5052 aluminum </strong> is Al-Mg alloy aluminum, magnesium is the main alloy element in 5052 alloy aluminum <br> <strong>is the most widely </strong> used one kind of rustproof aluminum, this alloy has high strength, especially the fatigue strength: High plasticity and corrosion resistance, heat treatment can not be strengthened, in the semi-cold hardening plasticity is good, cold hardening plasticity is low, good corrosion resistance, good weldability,
<strong>The mechanical </strong>properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment. <br> <strong>2024 </strong>is a typical duralumin alloy in the aluminum-copper-magnesium system.<br> <strong>It is a heat-treatable alloy </strong>with high strength, easy to work, easy to turn, and moderate corrosion resistance. <br> <strong>Main applications:</strong> aircraft structure, rivets, truck wheels, propeller components and other structural parts.
<strong>The main alloying elements in 6061 </strong> alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. <br> <strong>Widely used in </strong> various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
<strong>1060 aluminum plate</strong> is widely used in products with low strength requirements. <br> <strong>Products are often used in signs</strong> billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.<br>
<strong>6063 aluminum alloy</strong> material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy. <br> <strong>6063 aluminum alloy</strong> profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.<br>
<strong>5754 aluminum alloy</strong> is a typical al-Mg alloy with moderate strength, good corrosion resistance, weldability and easy to be formed.<br> <strong>In foreign countries, 5754 aluminum alloy</strong> sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
<strong>Al-cu-mg-zn alloy,</strong> which is made by adding Zn on the basis of duralumin. <br> <strong>This kind of alloy </strong> is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum. <br> <strong>Disadvantage is also </strong> very poor corrosion resistance, can improve the artificial aging temperature or aluminum. <br> <strong>Super hard aluminum alloy </strong> with "aluminum chao" Chinese pinyin prefix "LC" plus serial number. Such as LC4, LC6, etc., are mostly used to manufacture important components with large stress, such as aircraft girders.<br>
<strong>6061</strong> is a common duralumin with good machinability and moderate strength. <br> <strong>6061</strong> is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength. <br> It can still maintain good operation after annealing.
Office Address
Located in Jinan Free Trade Pilot Zone, Shandong Province
China is an international steel trade hub. We will connect China's steel resources with the world trade needs in a fast, stable and low-cost way through high-quality products. Together with partners from all over the world, common development, win-win cooperation! Hand in hand to heavy trust, create a better future!
Copyright : Zhongxin Iron and Steel (Shandong) Group Co., Ltd. Powerby : 300.cn jinan2 Seo Tags Privacy Statement
