Welcome to Zhongxin Iron and Steel (Shandong) Group Co., Ltd.
PRODUCT CENTER
<strong>Al-cu-mg-zn alloy,</strong> which is made by adding Zn on the basis of duralumin.<br> <strong>This kind of alloy </strong>is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum. <br> <strong>Disadvantage is also </strong>very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
<strong>6063 aluminum alloy</strong> material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy. <br> <strong>6063 aluminum alloy</strong> profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
<strong>7075 aluminum </strong>alloy is a cold - treated forging alloy, high strength, far better than mild steel. <br/> <strong>7075 </strong>is one of the strongest alloys commercially available. <br/> <strong>Under heat treatment</strong>, can achieve very high strength characteristics.<br/> <strong>The alloy </strong>also has good mechanical properties and anode reaction.<br/> <strong>Aluminum</strong> is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
<strong>1060 aluminum plate</strong> is widely used in products with low strength requirements. <br> Products are often used in signs, billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
<strong>6061</strong> is a common duralumin with good machinability and moderate strength. <br> <strong>6061</strong> is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.<br> <strong>It can still </strong>maintain good operation after annealing.<br> <strong>If there is a certain </strong> amount of manganese and chromium, the bad effect of iron can be neutralized.
we have different types of <strong>aluminum welding wire </strong> for sale, we have different types of stainless steel welding wire listed in each page, for example,<br> <strong>our aluminum welding wire</strong> is of good plasticity, S301 and ER1100 welding wire is suitable for gas shielded or submerged arc welding for corrosion resistant aluminum, S5356 and ER5356 aluminum welding wire is of good corrosion resistance and widely applied for submerged arc welding of aluminum alloy, especially for welding 5083 material.
<strong>Material alloy grade:</strong>1050.1060,1070<br/> <strong>Temper: </strong>O and H14<br/> <strong>length: </strong>10ft,20ft,25ft,20ft,50ft etc<br/> <strong>max working pressure:</strong>4.0Mpa<br/> <strong>Processing：</strong>Hot extruded
<strong>Thickness </strong> 0.1-400mm，etc<br/> <strong>Length:</strong>100-12000mm，or as required<br/> <strong>Width:</strong>20-3000mm，etc<br/> <strong>Standard:</strong>ASTM，AISI，JIS，GB， DIN，EN<br/> <strong>Certification:</strong>ISO, SGS，BV
<strong>Thickness </strong> 0.1-400mm，etc<br> <strong>Length:</strong>100-12000mm，or as required<br> <strong>Width:</strong>20-3000mm，etc<br> <strong>Standard:</strong>ASTM，AISI，JIS，GB， DIN，EN<br> <strong>Certification:</strong>ISO, SGS，BV
Office Address
Located in Jinan Free Trade Pilot Zone, Shandong Province
China is an international steel trade hub. We will connect China's steel resources with the world trade needs in a fast, stable and low-cost way through high-quality products. Together with partners from all over the world, common development, win-win cooperation! Hand in hand to heavy trust, create a better future!
Copyright : Zhongxin Iron and Steel (Shandong) Group Co., Ltd. Powerby : 300.cn jinan2 Seo Tags Privacy Statement
